一种改进的DME/DME导航台优化算法

航路飞行阶段的导航台选择是区域导航(RNAV)运行的主要环节。在采用 DME/DME 导航方式的 RNAV 选台过程中，基于最小定位误差标准差的选择方法是一种传统的选台算法。论文首先分析了基于最小定位误差选择算法在航路飞行阶段的 DME 台站选择性能，然后针对这种算法中导航台切换频繁的问题，提出了一种改进的 DME/DME 导航台优选算法，并通过对比两种选台算法在 A593 航路中的选台结果和导航台切换次数，对区域导航性能进行仿真评估。仿真结果表明，导航台优选算法能够自动选出一对具有更高精度的导航台，并且满足 DME/DME 区域导航要求，在一定程度上减少了导航台的频繁切换，提高了定位结果的连续性。     

New insight to the oxidation kinetics of silicon-containing steel at high temperature

This study investigated the oxidation kinetics of silicon-containing steel at 1150–1300 °C using a Simultaneous Thermal Analyzer under atmospheric conditions similar to that of an industry reheating furnace. There is a critical time point for the oxidation kinetics at an oxygen concentration of 4·0 vol.-%., following which the oxidation rate constant increases with the increasing oxidation temperature. The model coefficient A in the kinetic oxidation equation was found to be constant. However, before the critical time point, the oxidation rate constant remained unchanged; the model coefficient A decreased with the increasing temperature. Therefore, the kinetic model of silicon-containing steel for isothermal oxidation was observed to be a modified one on the basis of the experimental data. In addition, the critical time point was prolonged with the increasing isothermal oxidation temperature. Moreover, the oxidation activation energy of the tested silicon-containing steel was 366·16 kJ mol^?1.     

Learning an Evolutionary Embedding via Massive Knowledge Distillation

International Journal of Computer Vision - Knowledge distillation methods aim at transferring knowledge from a large powerful teacher network to a small compact student one. These methods often...     

Optimal carbon reduction level and ordering quantity under financial constraints

Carbon tax policy is widely adopted by many countries to curb carbon emissions. In the context of carbon tax policy, firms have more incentive to improve carbon reduction levels by reducing their carbon tax costs. However, firms need to bear carbon reduction costs that may cause shortage of capital. Thus, firms may face problems of financial constraints, which may demotivate firms to produce greener products. To address the decision‐making challenges of firms in the contexts of carbon tax policy and financial constraints, we consider a supply chain with a manufacturer who produces green products and a retailer who sells these products. Our study develops five models to investigate the two firms’ optimal wholesale price, carbon reduction level and ordering quantity, according to the manufacturer and retailer with or without financial constraints. Our goal in this study is to explore how carbon tax policy and banks’ interest rates affect the profits of the two firms, supply chain and consumer surplus. Certain managerial insights are obtained as follows. We demonstrate that carbon tax policy and banks’ interest rates demotivate the manufacturer to produce greener products and demotivate the retailer to order more products. If the interest rate to the manufacturer (retailer) is relatively low, then the manufacturer with financial constraint benefits (harms) the consumers compared with the retailer with financial constraint. Importantly, our analysis suggests that carbon tax policy harms the firms but benefits consumers, and the government in some conditions should reduce unit carbon tax.     

Fluid flow and heat transfer with nail dipping method in mould during continuous casting process

ABSTRACT

The character and cause of sliver defect on IF steel sheet surface are studied by means of SEM, unstable flow in mould could induce surface velocity and level fluctuations, leading to surface defects during continuous casting of steel. The nozzle clogging is a serious problem during the continuous casting of steel, due to its influence on the casting operations and products quality. In this study, the nail dipping method for measuring surface velocity and flow direction in molten steel were employed. The fluid flow in mould of whole casting sequence was investigated, especially during the nozzle clogging conditions. The results showed that when nozzle clogging occurred in the 7th heat, the flow velocities on R and L side of nozzle were 0.280 and 0.402?m/s, respectively. The surface defect ratio of hot-rolled and cold-rolled plates increases with the increase of heat flux deviation on both sides of the mould copper. The different clogging per cent on both sides of the nozzle will lead to asymmetry flow, the surface velocity is higher with the small clogging per cent side compared to that of relatively large per cent clogging side.     

矿粉颗粒表面微观形貌对过滤性能的影响

为研究矿粉表面微观形貌对过滤性能的影响,将-200目80%的5种不同的铁精矿粉A、B、C、D、E在过滤压力0.06 MPa、过滤时间3 min的条件下进行过滤试验;并测定5种铁精粉的最大分子水和最大毛细水,用扫描电镜观察其微观形貌。试验结果表明:5种矿粉的滤饼水分、最大分子水和最大毛细水由大到小依次均是A、B、C、D、E,并且与矿粉的表面微观形貌密切相关。矿粉颗粒表面粗糙,吸附较多细小颗粒,其比表面积和表面能较大,毛细管作用较强,所含的最大分子水和最大毛细水较大;毛细管作用强使得过滤速率降低,毛细水的脱除难度增大,最终导致滤饼水分较高。     

工程配套小型石料矿山复杂环境开采爆破技术

建设工程配套石料矿山相比传统以取得矿产品为目的的采石场具有周边环境复杂、施工强度高、全寿命周期短、工程质量要求灵活多变、爆破安全警戒工作量大等特点。以普陀区六横岛中远船务二期工程石料（宕渣）矿爆破开采工程为例，介绍了该类矿山开采爆破的设计施工技术要点及施工经验，有效解决了建设工程配套小型石料矿山复杂环境开采爆破存在的一些问题，对于类似工程实践有一定的借鉴价值。     

Doping manganese into CsPb(Cl/Br)3 quantum dots glasses: Dual-color emission and super thermal stability

CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) represent bright and tunable photoluminescence, it is regrettable that the air instability and poor water resistant properties prevent their application in optoelectronic devices. At the same time, the toxicity of lead is also a major factor restricting its development. As a consequence, we demonstrate the partial replacement of Pb with Mn through conventional melt-quenching and heat-treatment method preparation of Mn-doped CsPb(Cl/Br)₃ QD glass. Mn-doped CsPb(Cl/Br)₃ QD glass exhibits high luminescent intensity like QDs. It is important that Mn-doped CsPb(Cl/Br)₃ QD glass with Dual-Color maintained the same lattice structure like Mn-doped CsPb(Cl/Br)₃ QDs, and highly homogeneous spectral characteristics of Mn luminescence. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as the Pb-to-Mn feed ratio, annealing temperature. More importantly, the as-prepared orange Mn-doped CsPb(Cl/Br)₃ QD glass was employed to fabricate white LEDs combined with a commercial Ce³⁺:Y₃Al₅O₁₂ phosphor-in-glass (Ce-PiG) on top of a InGaN blue chip. And the constructed WLEDs generate a warm white with an optimal luminous efficacy (LE) of 67.00 lm/W, a high CRI of 81.4, and a low CCT of 4902 K.     

Modeling and analysis for multilayered complex communication network of satellite navigation system

This study is extended to construct the network model, the node model, and the link model of complex communication network for satellite navigation system (CCN‐SNS) based on the hierarchical architecture. Firstly, a method called snapshots was proposed to describe the dynamic topology for CCN‐SNS; secondly, another method was put forward to model the different nodes of the CCN‐SNS; thirdly, the different links between every two different nodes were modeled. Therefore, based on the OPNET tools, a simulation for the CCN‐SNS, which contains the models that proposed earlier used to analyze the navigation accuracy and network transmission performance, was performed.